Welcome to the HFNOsplitter project - SHFNO.org

This project is dedicated to doubling the capacity for High Flow Nasal Oxygen (HFNO) treatment by simultaneously connecting two COVID-19 patients to one HFNO-device by adding 3D printed parts. We also provide thorough medical instructions, validation, and risk analysis to enable other healthcare providers to adopt Split HFNO (SHFNO). This project is currently only aimed at the Airvo™ 2 Optiflow™ system (Fisher & Paykel Healthcare Limited, Berkshire, United Kingdom).

SHFNO Schematic setup Fig 1. SHFNO Schematic setup

N.B. 1 This solution is provided as is with no express or implied warranty. Provided under the CERN-OHL-S license. In no event will the authors be held liable for any damages arising from the use of this solution. Legal notice.

N.B. 2 This project is not done in conjuction or collaboration with, nor under the influence of the original manufacturer of any equipment, medical or otherwise.

Working group

  • Jesper Hessius

    • MD, Internal Medicine and Cardiology Resident, Västmanland Hospital Västerås Region Västmanland
    • Role: Project initiator - Project coordinator - Documentation - Risk analysis

  • Erik Cederberg

    • Chief Engineer, 3Dverkstan
    • Role: CAD - Design

  • Erik Ekbom

    • Biomedical Engineer, Imaging and Functional Technology, Skåne University Hospital Lund
    • Role: 3D printing
  • Petter Frieberg
    • MD, Engineer, PhD-Student, Clinical Physiology and Nuclear Medicine, Skåne University Hospital Lund
    • Role: Validation - Flow simulations
  • Einar Heiberg
    • Associate Professor, Engineer, Clinical Physiology, Skåne University Hospital Lund
    • Role: 3D printing - Regulatory affairs
  • Per Nordqvist
    • Biomedical Engineer, Department of Medical Technology Skåne
      Region Skåne
    • Role: Regulatory affairs - Documentation - Risk analysis
  • Göran Petersson
    • Biomedical Engineer, Department of Medical Technology Skåne
      Region Skåne
    • Role: Validation - Documentation

Thanks to

3Dverkstan for providing their time, effort, expertise and printers for this project. Without them none of this would have happened.

All the online communities, doctors, nurses and medical technicians who have provided their input and knowledge into every step of this process.

License

Provided under the CERN-OHL-S license.